Kentucky (KY) Towing Laws & Regulations

Before towing in Kentucky, you need to know the state's specific requirements for trailer brakes, safety chains, registration, and speed limits. Kentucky law requires trailer brakes on any trailer weighing over 2,000 lbs. The maximum speed limit while towing is 65 mph on most highways. Below is a summary of Kentucky's towing regulations and current diesel fuel costs.

Kentucky Towing Regulations at a Glance

Trailer Brake Requirements in Kentucky

Kentucky requires trailer brakes on trailers with a gross weight exceeding 2,000 lbs. This applies to the total loaded weight of the trailer, not just the empty weight. Electric brakes are the most common type and require a brake controller installed in the tow vehicle. Surge brakes (hydraulic) are common on boat trailers and do not require a controller. Before towing in KY, verify that your brake controller is properly calibrated and that the trailer brakes engage smoothly without locking.

Speed Limits While Towing in Kentucky

The maximum speed while towing in Kentucky is 65 mph. While the limit allows higher speeds, experienced towers recommend staying at 60-65 mph for optimal stability and fuel economy, even when the posted limit is higher. Always reduce speed in construction zones, adverse weather, and on winding roads regardless of the posted limit.

Trailer Registration in Kentucky

Kentucky requires trailer registration. You will need to register your trailer with the KY Department of Motor Vehicles and display a valid registration plate. Registration fees vary based on trailer weight and type. Utility trailers, boat trailers, travel trailers, and cargo trailers all require registration. Check with your local DMV office for current fees and required documentation.

Safety Chain Requirements

Kentucky requires safety chains on all towed trailers. Safety chains must be crossed under the trailer tongue (forming an X pattern) to cradle the tongue if the coupler separates from the hitch ball. The chains must be rated for the gross weight of the trailer and short enough to prevent the tongue from hitting the ground, but long enough to allow full turns. Replace any chains that show signs of wear, rust, or damage. Use grade 30 or higher proof coil chain or grade 70 transport chain for towing applications.

Fuel Costs for Towing in Kentucky

The average diesel price in Kentucky is approximately $3.55 per gallon. Towing increases fuel consumption significantly — expect 30-50% higher fuel usage compared to driving without a trailer, depending on trailer weight, aerodynamics, terrain, and speed. For a typical half-ton truck averaging 10-12 mpg while towing, a 500-mile trip through KY would cost roughly $161 in diesel. Plan your fuel stops in advance, especially in rural areas where stations may be far apart.

Towing Tips for Kentucky

• Carry a copy of your trailer registration and insurance when towing in KY
• Ensure your trailer lights (brake, turn, running) are functional before every trip
• Check tire pressure on both the tow vehicle and trailer before departure
• Carry a spare tire for the trailer — roadside assistance for trailers can be slow in rural areas
• If towing through mountainous areas, use a lower gear on descents to reduce brake heat
• Know your trailer's loaded weight — most towing accidents involve exceeding weight limits

Use our towing capacity calculator to estimate your vehicle's towing limits, or browse all states to compare towing regulations across the country.